DeviceControl This application is used to monitor and control the devices by operators. The devices of a chain are selectable via context selection and are arrang...
Overview of Applications This list of Applications gives an overview over all productively used Applications together with the information about the product owner...
Generic guidelines for vizualization of device status will have to be discussed again. Here in DeviceControl the status colors are based closely to that of the le...
Device status visualization Guideline status Draft Problem description Solution centered on beam influence of devices The basic idea here is that the most impor...
Device Status Guidelines Archive Old solution (valid until 20.07.2018) Statuses The basic idea is to distinguish between devices which are relevant in the curren...
Common GUI Components General Components * CERNs Application Main Frame * This central frame component shall be used for all applications. It already pr...
Handling of Command execution Common command property execution Command properties are used to invoke an action on a device (e.g. Init, Reset, PowerOn /Off, Driv...
Device related applications The following notes have been taken during the workshop or have been derived from the cards written during the workshop. As the worksh...
Generell requirements workshop 01 Dec 2017 Workshop 'Workshop zum Thema 'Schnelle Analyse bei strahlverhindernden Ereignissen' 08 Dec 2017 Workshop DAVE Data Ar...
Test Plans ParamModi Save, Trim and drive 1 Start application 1 Select a context in 'ParamModi Resident' tab. 1 Enter a value slightly different to t...
DeviceControlApp Info: On call duty / Rufbereitschaft Note: Annotations to the icons and colors of device status can be found in Status Guideline. 3.1 Tool To Ac...
Device Status Types This applies for DeviceAccess devices. Device status types, for example device status type GATE of the device GUL3VV0T of the device type VVC ...
Presentation Of Device Status in DeviceControl Generic guidelines for visualization of device status will have to be discussed again. Here in DeviceControl the st...