DeviceStatusTable

The DeviceStatusTable specifies the relevant status field values of the devices. The columns to left of the status description are the values of the FESA status flelds. (Other criteria, e.g. information from LSA can be also used.).Explanation:

• "-": no value available
• "*": any value and is not evaluated.

Common Device Status Table

ModuleReady	OpReady	Control	PowerState	Status Description	Color	RGB	Comment
-	-	-	-	device not connected to control system or unknown		(217,217,217)	no subscription possible
False	*	*	*	Hardware error
True	False	*	*	Device not ready to receive/send data
True	True	Local	*	Device in local mode
True	True	*	PowerOn	Device ready and power on
True	True	*	PowerOff	Device ready and power off
True	True	*	Standby	Standby			e.g. RF-Device: Generator:On, RF: Off
True	True	*	Power down/ Power up	Power change sequence			e.g. RF-Device
True	True	*	Indifferent	different power states of underlying devices			Special case: independently devices are combined to a superordinate device. e.g. CRYRING: electrostatic quadrupole YRT1LD22

Actuator Status Table (Motor class)

Mode	Control	Status	DetailedStatus / MotorStatus (Bit position)	Status Description	Color	RGB	Comment
-	-	-	device not connected to control system or unknown		(217,217,217)	no subscription possible
*	*	*	Hardware error			always on
*	*	2 set, 3 not set	slit/actuator inner end position in beam reached		(255,0,0)
*	*	2 not set, 3 set	slit/actuator outer end position in beam reached
*	*	4 set	slit/actuator moving		(255,0,0)	flashing red
*	*	2 not set, 3 not set	slit/actuator positioned in beam (not out nor in)
LocalControl / LocalConfiguration / LCDControl	*	*	Device not in remote mode

-- SigridHeymell - 18 Nov 2015