Overview of Applications

This list of Applications gives an overview over all productively used Applications together with the information about the product owner, responsible departments, developers etc. It is intended as starting point for getting information about Applications and for navigating to more detailed information an documentation.

Operational Applications used in the HKR

Application (Link to Documentation) Description Product Owner Responsible Department/Group Developers Link to Planning Link to Bugs
Beam Diagnostics Applications   Miriam Klich BEA Harald Bräuning    
Benno Mirko successor Stephan Reimann APS Markus Ohlig (application)
Christoph Hessler (physics)
   
BPM App     BEA/ACO Kajetan Fuchsberger
Harald Bräuning
   
BSS Control Monitor and Control Pattern Execution Christoph Wetzel APP Anneke Walter --- Bugzilla/BSS Control
Cross-application aspects   Christian Hillbricht all all Jira/APP Bugzilla/Applications
DeviceAutomator Automated scanning of set values Oksana Geithner DEC Wolfgang Geithner   Bugzilla/DeviceAutomator
DeviceControl Controlling and monitoring of devices Martin Stein APP Sigrid Heymell Jira/DeviceControl Bugzilla/DeviceControl
DigitizerApp Display measured digitizer data Max Müller APP Benjamin Peter Jira/DigitizerApp Bugzilla/DigitizerApp
EquipMonitor Monitor Device classes Jutta Fitzek APP APP --- Bugzilla/EquipMonitor
EquipState Read/write commands on Device classes Jutta Fitzek APP APP --- Bugzilla/EquipState
FRS DevConf App Configure FRS Application Devices Stephane Pietri     --- Bugzilla/Applications
FRS DriveStat App Overview about FRS Drives Stephane Pietri     --- Bugzilla/Applications
FRS FmgSkal App FRS Magnets Calibration, Precycling, .. Stephane Pietri     --- Bugzilla/Applications
FRS MagStat App Overview about FRS Magnets Stephane Pietri     --- Bugzilla/Applications
FRS Overview App FRS Overview       --- Bugzilla/Applications
HfWatchDogApp Surveillance of UNILAC HF   APS Max Müller ---  
IonSourceApp Ion Source Control Aleksey Adonin APP APP Jira/IonSourceApp Bugzilla/IonSourceApp
Launcher / Fixed Display Launcher Start Applications --- APP Christian Hillbricht Jira/Launcher Bugzilla/Launcher
MASP UI Interlock Status Petra Schütt APS Max Müller   Bugzilla/MaspApp
ParamModi Settings Managment Christoph Böhm APP Anneke Walter Jira/ParamModi Bugzilla/ParamModi
ProEmi Emittance Measurement and Evaluation Peter Gerhard APP Jonas Pforr Jira/ProEmiApp Bugzilla/ProEmiApp
ProfileGridApp Measuring Profile Grids Markus Ohlig APS Martin Stein Jira/ProfileGridApp Bugzilla/ProfileGridApp
PSA App Rufbereitschafts-Piepser-App   APS Miriam Klich    
RequesterApp Issue beam requests --- APP Anneke Walter --- Bugzilla/RequesterApp
SchedulingApp Create and Manage Patterns Christoph Wetzel APP Anneke Walter Jira/SchedulingApp Bugzilla/SchedulingApp
ScreenshotApp     APP APP Jira/APP Bugzilla/Applications
SequencerApp Automate Operator Steps Oksana Geithner SER Stefan Krepp --- Bugzilla/SequencerApp
SpectrumApp Spectrum Measurement and Evaluation Uwe Scheeler APP APP Jira/SpektrumApp Bugzilla/SpectrumApp
StoRiMoApp Storage Ring Mode App Sergey Litvinov APP Benjamin Peter --- Bugzilla/StoRiMoApp
StripperApp Foil Stripper Control --- APP APP Jira/StripperApp Bugzilla/StripperApp
SurveillanceApp Surveillance of Devices --- APP APP Jira/ADP Bugzilla/App/Uncategorized
TopApp Top (neues UNIABC) Hans Rödl APS Markus Ohlig --- ---
WhatsRunning Show currently running Patterns --- APP APP Jira/APP Bugzilla/Applications

Expert Applications (that are released, but typically only used by Experts)

Application (Link to Documentation) Description Product Owner Responsible Department/Group Developers Link to Planning Link to Bugs
CalibrationViewerApp Magnet Calibration Curve Viewer (based on CERN's App) APP APP APP Jira/APP Bugzilla/Applications
Expert HHT DeviceReadoutAndTrimApp HHT: Read settings and perform Trims (Dmitry Varentsov) APP APP Jira/APP Bugzilla/Applications
Expert SettingsExportApp Export Trims for a given Time Window (Michael Lestinsky) APP APP Jira/APP Bugzilla/Applications
HfServiceApp Expert HF Service Application (Jörg Mohr) APP APP ---  
Expert Septum App Expert DevAcc Septum App   FEC Klaudia Konhäuser   Bugzilla/Applications
joda-dci-cups-app Expert DevAcc DCI Faraday Cups Application Miriam Klich BEA Rainer Haseitl    
joda-dgx-grids-app Expert DevAcc DGX ProfileGrid Application Miriam Klich BEA Rainer Haseitl    
joda-ds-steppers-app Expert DevAcc DS Stepper Motors Application Miriam Klich BEA Rainer Haseitl    
joda-dtc-app Expert DevAcc DTC Trafo Application Miriam Klich BEA Rainer Haseitl    
joda-dti-trafos-app Expert DevAcc DTI Trafo Application Miriam Klich BEA Rainer Haseitl    
joda-kicker-app Expert DevAcc Kicker Application Miriam Klich BEA Rainer Haseitl    
joda-pla-pneudrives-app Expert DevAcc Pneum. Drives Application Miriam Klich BEA Rainer Haseitl    
OpticsViewer View Optics   APP APP Jira/APP Bugzilla/Applications

Expert Applications that are NOT released (only used by APP internally)

Application (Link to Documentation) Description Product Owner Responsible Department/Group
ParamConfig Modified version of CERN's ParamConfig: Create LSA Parameters for FESA Property#Fields APP

Services

Application (Link to Documentation) Description Product Owner Responsible Department/Group Developers Link to Planning Link to Bugs
LSA Server LSA Server --- APP APP   Bugzilla/LSA
LSA REST Service First version of LSA REST Interface --- APP APP   Bugzilla/LSA

WebViewerApp

Project Responsibilities

Project name Product Owner Developers
Web Applications (FSN, OLOG, Persondetails, Accelerator Status) Stephan Reimann Achim Bloch-Späth

Project Management

Link to Project management software Taiga (login page)

Login information for stakeholders can be found here (internal applications wiki)

Feedback Program

The application basically does feedback, stabilizing one parameter (readout value) by adjusting another parameter (control value). Read more...

From the F-DS-C-04e_User-Applications-v3.0 Specification Document

The functionallity described in the specification is seen as needed. Since these descriptions are taken from a specification document of the early design stage it might also be the case that the functionality is integrated into other applications or systems.

Beam Initialization Application

The Beam Initialization Application is a tool to initialize beam production chains and to define their attributes.

Offline Schedule Configuration

The Offline Schedule Configuration must provide functionality to define and alter beam scheduling and dispatching activities of the Timing Master. It interacts with the Beam Initialization Application and the Settings Management System.

Online Schedule Monitor

The Online Schedule Monitor must provide an online view of the timing master’s dispatching activities.

Setting and Trim Applications

Setting and Trim Applications must enable the operator to trim beam parameters and optimize the beam characteristics focusing a specific aspect of control (beam production chain and accelerator area), e.g. to optimize transmission for injection from SIS18 to SIS100.

MOVED TO... this is now called Param Modi

Device Diagnostic and Device Control Application

The Device Diagnostic and Device Control Application must enable the operator to directly access devices in order to monitor and control device status and device properties. For typical use cases of facility operation this application must not be used for trimming or setting beam parameters.

MOVED TO... This is now called DeviceControl

Beam Diagnostic Applications

Part of the User Applications is a set of applications which must monitor and analyze beam characteristics and parameters.

Beam Transmission Monitoring

The “Beam Transmission Application” must support online and offline display of beam transmission data in an integrated way.

Accelerator Overview on Fixed Displays

Applications like Online Schedule Monitor, Alarm Monitor Client, Interlock Monitor Client and status monitoring applications of the Personnel Safety Control System must be designed to be displayed on large fixed displays and be ready to be started in a non-interactive mode.

Alarm Application

The “Alarm Monitor and Management Application” as the central GUI-application for the alarm system must notify the operator and must manage current alarms.

MOVED TO... This is now an In-Kind contribution from Cosylab . The intial version of the application will be provided by Cosylab.

Interlock Applications

The GUI part of the interlock system is represented by the “Static Interlock Status Overview” application. It must provide functionality to display and to manage interlocks in a central place. Detailed configuration of the interlock system itself shall be done in a different application the “Interlock Signal Pickup Configuration Application”.

Archiving Applications

The central GUI for the archiving system is the “Archiving Data Display Application” which must display and correlate data in a generic way. The “Archiving Configuration GUI Application” must allow the configuration of data collection and data reduction that will be performed by the archiving system.

MOVED TO... This is now an In-Kind contribution from Cosylab . The intial version of the application will be provided by Cosylab.

Post Mortem Application

After an incident occurred in the machine and data has been collected from many services and devices the “Post Mortem Analysis Application” must allow displaying correlated measurement data of many devices to support detailed analysis of the incident.

Integration of the Cryogenic Control System

The Cryogenic Control System is designed to work independently from the accelerator control system. Nevertheless relevant parameters have to be monitored and integrated in accelerator operation applications.

Integration of the Vacuum Control System

The vacuum control system is designed to work independently from the accelerator control system. Nevertheless relevant parameters have to be monitored and integrated in accelerator operation applications.

Integration of the Personnel Safety System

The Personnel Safety Control System is designed to work independently from the operation of the accelerator control system. Nevertheless relevant parameters have to be monitored and integrated in accelerator operation applications.

Miscellaneous

Functionality must be provided to publish specific states and beam characteristics of accelerator facilities and beam production chains to the World Wide Web.

-- RaphaelMueller - 26 Aug 2015
Topic revision: r45 - 16 Aug 2023, FredericAmeil
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback