Overview of Applications

Project Responsibilities

Project name	Product Owner	Developers
Beam Diagnostics Applications	Miriam Klich	Harald Bräuning
"Benno" - Mirko successor	Stephan Reimann	Markus Ohlig (application) Christoph Hessler (physics)
Cross-application aspects	Christian Hillbricht	ACO-APP
Device Control	Martin Stein	Sigrid Heymell
Digitizer App	Max Müller	Benjamin Peter
Interlock Status (MASP GUI)	Petra Schütt	Max Müller
Ion Source	Aleksey Adonin	ACO-APP
ParamModi	Christoph Böhm	Anneke Walter
Profile Grid	Markus Ohlig	Martin Stein
Scan Application	Oksana Geithner	Wolfgang Geithner
Scheduling App / BSS Control	Christoph Wetzel	Anneke Walter
Sequencer	Oksana Geithner	tbd
Storage Ring App	Sergey Litvinov	Benjamin Peter
Top (neues UNIABC)	Hans Rödl	Markus Ohlig
Web Applications (FSN, OLOG, Persondetails, Accelerator Status)	Stephan Reimann	Achim Bloch-Späth

Project Management

Link to Project management software Taiga (login page)

Login information for stakeholders can be found here (internal applications wiki)

Under Development

ParamModi

Settings Managment Application. Read more...

Ion Source Control Program

Application for controlling and monitoring of the ion sources.

• Existing Swing application, used at Cryring
• New Ion Source Application (under development)

DeviceControl

Application for controlling and monitoring of devices. Read more...

Equip State

This application was originally developed at CERN and is part of the generic applications that are built on top of the LSA framework.

It is used to access the hardware equipment, executing read/write commands on it. Every command is linked to a set of associated device types on which it can be executed. Read more...

Equip Monitor

This application was originally developed at CERN and is part of the generic applications that are built on top of the LSA framework.

It is used to monitor generic cycle based equipment. Read more...

Feedback Program

The application basically does feedback, stabilizing one parameter (readout value) by adjusting another parameter (control value). Read more...

Emittance Evaluation Program

The application basically does display, evaluation and processing of GSI emittance files (.xml format)

Scan application

The scan application can be used to scan through a range of values of a property and then read another property. It's also possible to set two properties before reading. Read more...

Scheduling application

The scheduling application can be used to create and manage patterns ready for operation. Created patterns can be used to supply the facility with data. Read more...

BSS Control

BSS Control can be used to monitor and control the execution of patterns. Read more...

Storage Ring application

The Storage Ring application can be used to create contexts for storage rings and control their execution flow. Read more...

Digitizer application

The digitizer app allows to display measured data of the various digitizer installations along the beam line. Read more...

Launcher / Fixed Display Launcher

The Launcher app is used to start all main control room applications.

From the F-DS-C-04e_User-Applications-v3.0 Specification Document

The functionallity described in the specification is seen as needed. Since these descriptions are taken from a specification document of the early design stage it might also be the case that the functionality is integrated into other applications or systems.

Beam Initialization Application

The Beam Initialization Application is a tool to initialize beam production chains and to define their attributes.

Offline Schedule Configuration

The Offline Schedule Configuration must provide functionality to define and alter beam scheduling and dispatching activities of the Timing Master. It interacts with the Beam Initialization Application and the Settings Management System.

Online Schedule Monitor

The Online Schedule Monitor must provide an online view of the timing master’s dispatching activities.

Setting and Trim Applications

Setting and Trim Applications must enable the operator to trim beam parameters and optimize the beam characteristics focusing a specific aspect of control (beam production chain and accelerator area), e.g. to optimize transmission for injection from SIS18 to SIS100.

this is now called Param Modi

Device Diagnostic and Device Control Application

The Device Diagnostic and Device Control Application must enable the operator to directly access devices in order to monitor and control device status and device properties. For typical use cases of facility operation this application must not be used for trimming or setting beam parameters.

This is now called DeviceControl

Beam Diagnostic Applications

Part of the User Applications is a set of applications which must monitor and analyze beam characteristics and parameters.

Beam Transmission Monitoring

The “Beam Transmission Application” must support online and offline display of beam transmission data in an integrated way.

Accelerator Overview on Fixed Displays

Applications like Online Schedule Monitor, Alarm Monitor Client, Interlock Monitor Client and status monitoring applications of the Personnel Safety Control System must be designed to be displayed on large fixed displays and be ready to be started in a non-interactive mode.

Alarm Application

The “Alarm Monitor and Management Application” as the central GUI-application for the alarm system must notify the operator and must manage current alarms.

This is now an In-Kind contribution from Cosylab . The intial version of the application will be provided by Cosylab.

Interlock Applications

The GUI part of the interlock system is represented by the “Static Interlock Status Overview” application. It must provide functionality to display and to manage interlocks in a central place. Detailed configuration of the interlock system itself shall be done in a different application the “Interlock Signal Pickup Configuration Application”.

Archiving Applications

The central GUI for the archiving system is the “Archiving Data Display Application” which must display and correlate data in a generic way. The “Archiving Configuration GUI Application” must allow the configuration of data collection and data reduction that will be performed by the archiving system.

This is now an In-Kind contribution from Cosylab . The intial version of the application will be provided by Cosylab.

Post Mortem Application

After an incident occurred in the machine and data has been collected from many services and devices the “Post Mortem Analysis Application” must allow displaying correlated measurement data of many devices to support detailed analysis of the incident.

Integration of the Cryogenic Control System

The Cryogenic Control System is designed to work independently from the accelerator control system. Nevertheless relevant parameters have to be monitored and integrated in accelerator operation applications.

Integration of the Vacuum Control System

The vacuum control system is designed to work independently from the accelerator control system. Nevertheless relevant parameters have to be monitored and integrated in accelerator operation applications.

Integration of the Personnel Safety System

The Personnel Safety Control System is designed to work independently from the operation of the accelerator control system. Nevertheless relevant parameters have to be monitored and integrated in accelerator operation applications.

Miscellaneous

Functionality must be provided to publish specific states and beam characteristics of accelerator facilities and beam production chains to the World Wide Web.

-- RaphaelMueller - 26 Aug 2015