-- EnkhboldOchirsuren - 17 Oct 2024

How-To: Burst generation

this functionality is under development and not available in any release

A simple solution for generating bursts using a Timing Receiver (TR). The software implementation is proposed as LM32 firmware (burstgen.bin) and Saftlib utility (saft-burst-ctl).

The latest status (as of October 2024):

  • LM32 FW: v00.01.01 ("fallout" branch of bel_projects)
  • Saftlib: v3.0.0 ("master" branch of saftlib)

$ eb-info -w dev/wbm0
Project     : pci_control
Platform    : pexaria5 +db[12] +wrex1
FPGA model  : Arria V (5agxma3d4f27i3)
Source info : fallout-3847
Build type  : fallout-v6.1.2
Build date  : Mon Aug 09 08:48:31 CEST 2021
Prepared by : Timing Group Jenkins <csco-tg@gsi.de>
Prepared on : tsl021.acc.gsi.de
OS version  : CentOS Linux release 7.9.2009 (Core), kernel 3.10.0-1160.36.2.el7.x86_64
Quartus     : Version 18.1.0 Build 625 09/12/2018 SJ Standard Edition

  33b311a Merge pull request #287 from GSI-CS-CO/dm-fallout-tests
  79bfcd2 datamaster-tests.tex: add hint to install scheduleCompare as a prerequisite.
  5a22eb0 Makefile: use python3 explicitly. Tests do not run with python2.
  0113dcd Merge branch 'fallout' into dm-fallout-tests
  f6369d7 test_safe2remove.py: use longer duration for some long running performance tests, 3. try

Detecting Firmwares ...

Found 1 RAMs, 1 holding a Firmware ID


********************
* RAM @ 0x04060000 *
********************
UserLM32
Stack Status:  okok                                                 
Project     : burstgen
Version     : 00.01.01
Platform    : pcicontrol
Build Date  : Thu May 11 10:33:48 CEST 2023
Prepared by : eochirs Enkhbold Ochirsuren <E.Ochirsuren@gsi.de>
Prepared on : acopc061
OS Version  : Linux Mint 21  Linux 5.15.0-71-generic x86_64
GCC Version : lm32-elf-gcc(GCC)4.5.3 (build )
IntAdrOffs  : 0x10000000
SharedOffs  : 0x500
SharedSize  : 16K
FW-ID ROM will contain:

   4a410af6e burstgen: provide the common buffer addresses for host communication
   401656634 burstgen: re-factored the task scheduler period measurement
   e04891af6 burstgen: remove existing IO conditions before setting up each test
   1b19e6fee burstgen: extend demo script for supporting saftlib v3
   cb48356e1 Merge pull request #326 from GSI-CS-CO/b2b_dietrich_2023-jan-30
*****

$ saft-ctl -fi bla
saftlib source version                  : saftlib 3.0.0 (v2.5.1-462-gdae822c): May 11 2023 10:34:57
saftlib build info                      : built by eochirs on May 11 2023 10:35:37 with acopc061 running Linux Mint

1. Limitations

Please consider the characteristics given below:
  • maximum number of bursts: 16
  • minimum burst period: 200 us (dependent from the maximum number of bursts)
  • internal delay: 200 us (from control message to burst production)

2. Run a demo

Demo burst production is composed in bash script "bel_projects/modules/burst_generator/test/run_burst_generation.sh". It generates 2 kinds of burst at chosen output (IO1/B1) of pexaria5/SCU.

On local host, you need:
  • bel_projects
  • pexaria5 (WR lock is required)
  • (optional) LEMO cable

2.1. Build the LM32 firmware (burstgen.bin)

Download the bel_projects project repo and check out the fallout branch. The firmware source code is available in the bel_projects/modules/burst_generator directory.

Build a firmware binary on your local host and copy it to the dedicated folder for saftlib (where saftlib search for firmware):
$ make                                  # build binary burstgen.bin
$ cp burstgen.bin <prefix>/share/saftlib/firmware # prefix=/usr by default

2.2. Build and install saftlib (saft-burst-ctl, saftbusd)

The saftlib project is available in the bel_projects/ip_cores/saftlib directory. Check out the master branch, build and install it:
$ make -j8 && sudo make install

Both firmware and saftlib are ready to run.

2.3. Load the saftbusd daemon

Specify the socket path required by saftlib (for non-root user):
$ export SAFTBUS_SOCKET_PATH=/tmp/saftbus

Assume that TR on local host is available as dev/wbm0. Launch the saftbusd daemon:
$ saftbusd libsaft-service.so tr0:dev/wbm0 # blocks the current terminal

It blocks the current terminal, therefore press "CTRL+Z" type "bg" to release the terminal.

Check saftbusd status by invoking:
$ saftbus-ctl -s

services:
  object-path                             ID [owner] sig-fd/use-count interface-names
  /de/gsi/saftlib                         2 [-1]d SAFTd 
  /de/gsi/saftlib/tr0                     21 [-1]d TimingReceiver BuildIdRom ECA ECA_Event ECA_TLU LM32Cluster Mailbox OpenDevice Reset TempSensor Watchdog WhiteRabbit 
  /de/gsi/saftlib/tr0/acwbm               3 [-1]  WbmActionSink ActionSink Owned 
  /de/gsi/saftlib/tr0/embedded_cpu        4 [-1]  EmbeddedCPUActionSink ActionSink Owned 
  /de/gsi/saftlib/tr0/inputs/IO1          13 [-1]  Input EventSource Owned 
  /de/gsi/saftlib/tr0/inputs/IO2          15 [-1]  Input EventSource Owned 
  /de/gsi/saftlib/tr0/inputs/IO3          17 [-1]  Input EventSource Owned 
  /de/gsi/saftlib/tr0/inputs/MHDMR_SYIN   19 [-1]  Input EventSource Owned 
  /de/gsi/saftlib/tr0/inputs/MHDMR_TRIN   20 [-1]  Input EventSource Owned 
  /de/gsi/saftlib/tr0/outputs/IO1         14 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/IO2         16 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/IO3         18 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/LED1_ADD_R  9 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/LED1_BASE_R 5 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/LED2_ADD_B  10 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/LED2_BASE_B 6 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/LED3_ADD_G  11 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/LED3_BASE_G 7 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/LED4_ADD_W  12 [-1]  Output ActionSink Owned 
  /de/gsi/saftlib/tr0/outputs/LED4_BASE_W 8 [-1]  Output ActionSink Owned 
  /saftbus                                1 [-1]  9/1 Container 

active plugins: 
  libsaft-service.so

connected client processes:
  8 (pid=5908)

allocator:
  chunksize   used/available
        128   908/16384
       1024   48/1024
      16384   5/64
       heap   0/-

Proceed next steps, if you agree the output by saftbus-ctl.

2.4. Run the demo script

All actions required to generate 2 kinds of burst at chosen output (eg, IO1 for pexaria5, B1 for SCU) are given in the bel_projects/modules/burst_generator/test/run_burst_generation.sh bash script.

Firs it detects whether saftbusd is running.

Next it asks if the burst generator firmware to be loaded. Answer 'y' if the firmware is not loaded at all.

Further it will generate 2 kinds of bursts sequentially:
  • infinite: period=15ms, high pulse=10ms
  • run-once: period=20us, high pulse=10us (duration 1,44 ms)
$ ./run_burst_generation.sh  # follow the output message

2.5. Check the burst generation

One can verify the burst generation quickly in different ways.

A. Look at the firmware output msg on the TR console.
$ eb-console dev/wbm0  # inspect the output message

The output messages are for debug purpose, hence, might be not user-friendly.

B. Snoop input events by directing the burst signal to an input port

Here, burst signal generated at chosen port will be delivered to an free input port (eg., IO3 for pexaria5). Do not use IO2/B2 for this purpose, as it is reserved for measurement this demo script.

Connect the IO1 port to IO3 (in case of pexaria5) with a LEMO cable.

Configure the IO3 port to generate input events on signal changes:
$ saft-io-ctl tr0 -n IO3 -b 0xffff100000000000

Snoop the input by invoking:
$ saft-io-ctl tr0 -s

IO             Edge     Flags       ID                  Timestamp           Formatted Date               
---------------------------------------------------------------------------------------------------------
# starting the infinite burst

IO3            Rising   .... (0x0)  0xfffe000000000005  0x4c8846d30de0f     1970-01-16 13:59:31.000000015
IO3            Falling  .... (0x0)  0xfffe000000000004  0x4c8846dc97488     1970-01-16 13:59:31.010000008
IO3            Rising   .... (0x0)  0xfffe000000000005  0x4c8846e15bfcf     1970-01-16 13:59:31.015000015
IO3            Falling  .... (0x0)  0xfffe000000000004  0x4c8846eae5648     1970-01-16 13:59:31.025000008
IO3            Rising   .... (0x0)  0xfffe000000000005  0x4c8846efaa18f     1970-01-16 13:59:31.030000015

# stopping the infinite burst and starting the run-once burst

IO1            Rising   .... (0x0)  0xfffe000000000001  0x4c894424e8600     1970-01-16 14:00:39.000000000
IO3            Rising   d... (0x8)  0xfffe000000000005  0x4c894424e860f     1970-01-16 14:00:39.000000015
IO3            Falling  d... (0x8)  0xfffe000000000004  0x4c894424ead18     1970-01-16 14:00:39.000010008
IO3            Rising   d... (0x8)  0xfffe000000000005  0x4c894424ed42f     1970-01-16 14:00:39.000020015
...
IO3            Rising   d... (0x8)  0xfffe000000000005  0x4c8944263e2cf     1970-01-16 14:00:39.001400015
IO3            Falling  d... (0x8)  0xfffe000000000004  0x4c894426409d8     1970-01-16 14:00:39.001410008
IO3            Rising   d... (0x8)  0xfffe000000000005  0x4c894426430ef     1970-01-16 14:00:39.001420015
IO3            Falling  d... (0x8)  0xfffe000000000004  0x4c894426457f8     1970-01-16 14:00:39.001430008
# stopping the run-once burst

When the demo script re-started, input events can be seen. Check the timestamp of events to verify the burst signal period and pulse length.
I Attachment Action Size DateSorted ascending Who Comment
bg_interaction_wb_modules.pngpng bg_interaction_wb_modules.png manage 175 K 15 Aug 2019 - 14:33 EnkhboldOchirsuren Interaction of the Wishbone modules in generating bursts
bg_sequence_host_burst_generator.pngpng bg_sequence_host_burst_generator.png manage 127 K 22 Aug 2019 - 09:42 EnkhboldOchirsuren Communication between a command-line tool and the burst generator
Topic revision: r10 - 17 Oct 2024, EnkhboldOchirsuren
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback