3.0.7 (FESA3 7.3.0)  (INT/PRO environment)

• less exception/condition throwing in RT actions to avoid subscription notification stops

3.0.6 (FESA3 7.3.0)  (INT/PRO environment)

• bring back separate fields to remember last set acquisition context for triggered moves (supports actual position visualization in device control)

3.0.5 (FESA3 7.3.0)  (INT environment)

• new: hack to make detailed status information in expert property
• internal code clean-up

3.0.4 (FESA3 7.3.0)  (INT & PRO environment)

• bit 12 handling: revamped in status update action, detailed status severity set to info (was: error_on_false)
• acquisition update: acquisition context only updated for timing events
• SettingDirect-Property: read back set value only

3.0.3 (FESA3 7.3.0)  (INT & PRO environment)

• #15 Applications want to know only about device_control states LOCAL/REMOTE
• #35 Device reports same value in Setting#position and Acquisition#position
• set Status/interlock bit as well if stepper motor system is not in remote mode
• display motor numbers in Configuration property

3.0.2 (FESA3 7.3.0)  (INT environment)

• Set opReady-Bit to false and display interlock when stepper motor system is not in REMOTE mode

3.0.1 (FESA3 7.3.0)  (INT environment)

• Status/detailedStatus/Is_NOT_Within_Position_Tolerance-Bit set differently while a motor/motor pair is moving

3.0.0 (FESA3 7.3.0) (INT environment)

• new: global expert property "Metrics" introduced for advanced diagnostics
• new: expert property ExpertMovableDeviceInfo, which combines Status- and Acquisition-information (Standard Status and Acquisition-Properties are still available)
• new: check whether a motor is already at the set position before the next manual set
• new: end of a move is announced via condition mechanism
• acquisition context helper fields removed
• GSI acquisition context items are set according to move source (manually: 0 / timing-triggered: event information)
• renamed property for understandability: StopMotor -> Stop
• renamed properties: Setting -> SettingDirect / SettingTriggered -> Setting
• Acquisition/position_tolerance-Bit renamed to is_not_within_position_tolerance for clarification
• ModuleStatus labels configured
• don't display interlock if solely an amplifier fault from a previous system error is still displayed
• internal code cleanup