BEL projects building HOW TO THIS HOWTO IS DEPRECATED Prerequistes The following packages are required to build BEL projects: $ sudo apt get install build esse...
Installing Quartus under Ubuntu 14.04 (and possibly others) THIS HOWTO IS DEPRECATED Introduction This page contains a few notes on installing Altera's Quartu...
How To: Quick Start THIS HOWTO IS DEPRECATED (look in the /bel_projects readme) The following will provide you with "master" of our our repository. 1 git clo...
How To: Installation of a Timing Receiver or SCU THIS HOWTO IS DEPRECATED This how to summarizes the steps required to install a timing receiver. Setup up a FE...
Timing System within miniCS THIS HOWTO IS DEPRECATED After reflashing and upgrading the SCUs to 64bit, the timing system of release R1 is no longer operational!...
Sending Stuff from GSI Elsewhere THIS HOWTO IS DEPRECATED Requirements * ebiss Account @ GSI, see here * Account number ("Kostenstelle" or "Auftragsnumme...
How to Build and Deploy the Timing Run Time Environment THIS HOWTO IS DEPRECATED The documentation here describes a version of the script that has never been pu...
Building and Deployment for a Specific Kernel and Installation into a Staging Directory THIS HOWTO IS DEPRECATED Remark: This is really special. The information...
WR Switch: How To Flash a WR Switch THIS HOWTO IS DEPRECATED Introduction Most importantly, you should the WRS manual. For version 4.2, see here. Basically, al...
WR Switch: How To Cross Compile Hello World THIS HOWTO IS DEPRECATED This describes how I cross compiled hello world for switch Getting the Tools This assumes ...
WR Switch: How To Use a WR Switch THIS HOWTO IS DEPRECATED This is just a short list of things I found useful Login to a Switch * ssh via the management po...