AVGCNTIDataAdapter | AVGCNTI Data Adapter |
AVGCNTSDataAdapter | AVGCNTS Data Adapter |
CallDefINIT< T > | Call INIT: Initialize the device |
CallDefRESET< T > | Call RESET: Reset the device |
CallSGLRESET | Call SGLRESET: Reset single shot mode |
CONSTANTDataAdapter | CONSTANT Data Adapter |
ConstantStructType | Custom Data Type ConstantStructType |
COPYSETDataAdapter | COPYSET Data Adapter |
CTRLMODEDataAdapter | CTRLMODE Data Adapter |
CTRLMODEParaAdapter | CTRLMODE Parameter Adapter |
CURRAVGDataAdapter | CURRAVG Data Adapter |
CURRAVGParaAdapter | CURRAVG Parameter Adapter |
CURRINFODataAdapter | CURRINFO Data Adapter |
DTIDevice | Pulsed current measurement device class |
GAINMODIDataAdapter | GAINMODI Data Adapter |
GAINMODSDataAdapter | GAINMODS Data Adapter |
GAINRNGIDataAdapter | GAINRNGI Data Adapter |
GAINRNGSDataAdapter | GAINRNGS Data Adapter |
GATESELDataAdapter | GATESEL Data Adapter |
MMIDataTypeType | Custom Data Type MMIDataTypeType |
MMIINFODataAdapter | MMIINFO Data Adapter |
ReadAVGCNTI | Read AVGCNTI: actual average count of current average |
ReadAVGCNTS | Read AVGCNTS: average count of current average reference |
ReadCONSTANT | Read CONSTANT: Read Constant |
ReadCTRLMODE | Read CTRLMODE: control mode |
ReadCTRLVALU | Read CTRLVALU: control values |
ReadCTRLVALUDataAdapter | CTRLVALU Data Adapter for read |
ReadCTRLVALUParaAdapter | CTRLVALU Parameter Adapter for read |
ReadCURRAVG | Read CURRAVG: master average |
ReadCURRINFO | Read CURRINFO: Read info |
ReadDefACTIVE | Read ACTIV: Read device active state for given virtual accelerator |
ReadDefALRMSTAT< T > | Read ALRMSTAT: Read alarm statistics since Devman (re)start |
ReadDefCONNDESC< T > | Read CONNDESC: Read description of actual connections of the device |
ReadDefDEVDESC | Read DEVDESC: Read device description |
ReadDefDEVDESC2 | Read DEVDESC2: Read device description compatible with old system |
ReadDefEQMERROR | Read EQMERROR: Read error buffers of device for specified virtual accelerator |
ReadDefINFOSTAT | Read INFOSTAT: Read miscellaneous device state informations |
ReadDefNOMEN< T > | Read NOMEN: Read nomenclature of device |
ReadDefPOWER | Read POWER: Read if device's power supply is switch on or off |
ReadDefPROPDESC< T > | Read PROPDESC: Read property description of device's equipment model |
ReadDefREQDESC< T > | Read REQDESC: Read description of pending requests of the device |
ReadDefSHUTUP< T > | Read SHUTUP: Read if device sends or does not send alarms |
ReadDefSTATUS< T > | Read STATUS: Read device status |
ReadDefVERSION< T > | Read VERSION: Read EQM, USR, and MIL version strings as well as the EQM variant string |
ReadGAINMODI | Read GAINMODI: actual gain calibration mode |
ReadGAINMODS | Read GAINMODS: gain calibration mode reference |
ReadGAINRNGI | Read GAINRNGI: actual gain range |
ReadGAINRNGS | Read GAINRNGS: gain range reference |
ReadGATESEL | Read GATESEL: select source of gate-signal (write or read reference value) |
ReadMMIINFO | Read MMIINFO: values of MMI |
ReadSGLCURR | Read SGLCURR: Single shot measurement |
SGLCURRDataAdapter | SGLCURR Data Adapter |
TRangeType | Custom Data Type TRangeType |
WriteAVGCNTS | Write AVGCNTS: average count of current average reference |
WriteCOPYSET | Write COPYSET: Copy all reference values |
WriteCTRLMODE | Write CTRLMODE: control mode |
WriteCTRLVALU | Write CTRLVALU: control values |
WriteCTRLVALUDataAdapter | CTRLVALU Data Adapter for write |
WriteCTRLVALUParaAdapter | CTRLVALU Parameter Adapter for write |
WriteDefACTIVE | Write ACTIV: Set device active or inactive for given virtual accelerator |
WriteDefPOWER | Write POWER: Switch device's power supply on or off |
WriteDefSHUTUP< T > | Write SHUTUP: Enable or disable the sending of alarms |
WriteGAINMODS | Write GAINMODS: gain calibration mode reference |
WriteGAINRNGS | Write GAINRNGS: gain range reference |
WriteGATESEL | Write GATESEL: select source of gate-signal (write or read reference value) |
WritePOWER | Write POWER: Power of main power supply |